2018 Honda Gold Wing Specifications

10/25/2017 12:56:00 AM

Model Gold Wing Tour Gold Wing Tour DCT Gold Wing Tour Airbag DCT Gold Wing Gold Wing DCT
ENGINE
Engine Type 1,832cc liquid-cooled horizontally opposed six-cylinder four-stroke
Valve Train Single overhead Unicam® w/ 4 valves per cylinder, finger-follower rocker arm on intake, roller-rocker arm on exhaust
Bore x Stroke 73mm x 73mm
Compression Ratio 10.5:1
Induction Single throttle w/ 50mm bore, Throttle By Wire (TBW)
Ignition Full transistorized ignition
Transmission 6-speed manual w/ Reverse 7-speed automatic DCT w/ Walking Mode F/R 6-speed manual 7-speed automatic DCT w/ Walking Mode F/R
Clutch Multi-plate wet clutch (2) multi-plate wet clutches Multi-plate wet clutch (2) multi-plate wet clutches
Final Drive Shaft
SUSPENSION
Front Double-wishbone front-suspension system w/ Showa shock absorber; 4.3 in. travel
Rear Pro-Link® system w/ Showa shock absorber, 4.1 in. travel
BRAKES
Front (2) radially mounted 6-piston Nissin calipers w/ 320mm rotors, electronically controlled combined ABS
Rear (1) 3-piston Nissin caliper w/ 316mm rotor, electronically controlled combined ABS
TIRES
Front 130/70-18
Rear 200/55-R16
MEASUREMENTS
Rake (Caster Angle) 30.5°
Trail  109mm
Length 101.4 in. 97.4 in.
Width 36.4 in. 35.6 in. 36.4 in. 35.6 in.
Height 56.3 in. low windscreen; 61.2 in. high windscreen 52.8 in. low windscreen; 56.9 in. high windscreen
Seat Height 29.3 in.
Ground Clearance  5.1 in.
Wheelbase 66.7 in.
Fuel Capacity 5.5 gal.
Color Candy Ardent Red, Pearl White, Pearl Hawkseye Blue Candy Ardent Red/Black Candy Ardent Red, Matte Majestic Silver, Pearl Stallion Brown
Curb Weight* 833 lbs. 842 lbs. 787 lbs. 800 lbs.

*Includes all standard equipment, required fluids and full tank of fuel—ready to ride
Meets current EPA standards
Models sold in California meet current CARB standards and may differ slightly due to emissions equipment
All specifications subject to change